DHC RF Products

Wireless Keychain Remote Control For Decora Home Controls

Leviton expands DHC control capability even further with its sleek new HCCKR Key Chain Remote Controller. This handy compact remote control transmitter is conveniently designed to fit on a key chain and is to be used outdoors. The HCCKR can turn lights or appliances ON and OFF via RF (radio-frequency) signals, through walls and ceilings, when pointed in the direction of the transceiver. It can control two DHC-controlled loads with an effective transmission range of 75 feet. A typical application for this unit is the control of home lights from a vehicle when entering one’s driveway.

Application:

• The HCCKR Key Chain Remote Controller is an ideal device because of its compact size and easy portability. Turn ON/OFF your home’s entry/exterior, garage and driveway lighting as you approach. This gives you the added security of never having to enter a dark house again.

Features and Benefits:

HCCKR Key Chain Remote Controller

• Provides convenient wireless ON/OFF control of 2-sequential DHC addresses
• User-programmable for any 2 sequential addresses
• Range up to 75 feet from HCPRF Plug-In Transceiver
• Uses long-life 3V CR2032 lithium battery
• Replaces Cat. No. 6332 DHC Key Chain Remote Controller

NOTE: A Cat. No. HCA02-10E DHC System Amplifier Module must be installed in every DHC installation to ensure maximum signal strength. In some installations more than one may be required.

Wireless Remote Control Transceiver For Decora Home Controls

Leviton’s third new offering, the HCPRF Plug-In Transceiver, functions as a receiver that accepts ON/OFF, DIM/BRIGHT and ALL ON/ALL OFF RF (radio frequency ) commands from the DHC Universal Remote Control and ON/OFF signals from the Key Chain Remote Controller, as well. The HCPRF works with all DHC Receivers by retransmitting those signals throughout a home’s existing electrical wiring. The Transceiver also incorporates a built-in outlet suitable for ON/OFF switching of incandescent lamps rated up to 300W. The lamp can be controlled remotely or locally via the programming button on its face, which is also used to change the HCPRF’s address if desired. The unit also features Leviton’s exclusive Intellisense™ Technology that compensates for noise on home AC power lines to ensure optimum system performance and reliability. Built-in 2-Way signaling capability permits local status of an attached lamp to show on all 2-Way capable Controllers.

Features and Benefits:

HCPRF Plug-In Transceiver

• Accepts RF (radio frequency) DHC commands from the DHC Universal Remote and Key Chain Remote Controllers; retransmits them to other DHC Receivers connected anywhere on a home’s existing electrical wiring to provide convenient wireless ON/OFF, DIM/BRIGHT and ALL ON/ALL OFF control of lights and ON/OFF control of appliances
• Features Leviton’s exclusive Intellisense™ Technology which automatically adjusts signal strength to compensate for noise on the power line, ensuring optimum system performance and reliability
• Provides one 120VAC, 60Hz, 300W maximum outlet for an incandescent plug-in lamp that can be controlled by wired Controllers or RF Remote Controllers as well as locally via its programming button
• Features a programming button on its face so that its DHC address can be changed if desired; can be conveniently programmed from a wired Controller or from a RF Remote Controller
• Replaces Cat. No. 6314-W DHC Transceiver

NOTE: A Cat. No. HCA02-10E DHC System Amplifier Module must be installed in every DHC installation to ensure maximum signal strength. In some installations more than one may be required.